Our Products

'Our Certification is your Assurance', 'Our Versatility is your Benefit'

SRS Electric NSW Pty Ltd is ABB Licensee for Manufacturing in Australia of MV ABB – Unisec 3.3kV,6.6kV,12kV and 24kV Switchgear with following data:

  • Type tested to Australian and IEC standards including arc fault containment.
  • Up to 20kA, 2000amps
  • Earthquake tested
  • Temperature rise test
  • Segregation to form 4B
  • Safe access

SRS Electric NSW Pty Ltd is Siemens Licensee for Manufacturing in Australia of LV Siemens-Sivacon S8 Motor Control Centre and Distribution Boards with following data:

  • Fully Type tested to IEC and AS/NZS including arc fault containment.
  • Up to 100kA, 7000amps
  • Temperature rise test
  • Arc proofing in accordance with IEC standards
  • Earthquake tested
  • Fully withdrawable starters and feeders to AS 3439.1 (Forms 1 to 4)
  • Segregation to form 4B
  • Safe access
  • Single sided, back connected, and back to back options
  • Generous busbar zones, insulated or uninsulated busbars

SRS Electric NSW Pty Ltd is Siemens Licensee for Manufacturing in Australia of LV Siemens-Sivacon 8PT Motor Control Centre and Distribution Boards

  • Fully Type tested to IEC and AS/NZS including arc fault containment.
  • Arc proofing in accordance with IEC standards
  • Earthquake tested
  • Fully withdrawable and Demountable starters and feeders to AS 3439.1 (Forms 1 to 4)
  • Segregation to form 4B
  • Safe access
  • Single sided, back connected, and back to back options
  • Generous busbar zones, insulated or uninsulated busbars

SRS Electric NSW Pty Ltd is Siemens Licensee for Manufacturing in Australia of LV Siemens-Simotrol Motor Control Centre and Distribution Boards

  • Type tested to AS3439 including limited arc fault containment.
  • Earthquake tested
  • Temperature rise test
  • Demountable starters and feeders to AS 3439.1 (Forms 1 to 4)
  • Safe access
  • Single sided, back connected, and back to back options
  • Generous busbar zones, insulated or uninsulated busbars

LV Outdoor 316 Stainless Steel / Marine Grade Aluminium Kiosks

  • Designed to comply with Sydney Water Corporation requirements.
  • Demountable starters and feeders to AS 3439.1 (Forms 1 to 4)
  • Up to IP 56 protection

Transportable switchroom packages

  • Protection Panels, Control and Communication Panels for 66-500kV Substations
  • Transportable Switchroom fitout, interpanel wiring and testing.
  • Aluminium / Stainless Steel Substation Outdoor Kiosks and Marshalling Panels.

'Safe access’

SRS Electric NSW Pty Ltd design team is very meticulous when it comes for the safe access and intelligent layout requirements including easy front and rear cable access to cells, generous cable ways along the entire board length, multiple cable gland plate entry positions as well as allowing for unrestricted access for future extensions.

‘Environmental’

Because of the broad range of applications, we are experts in tailoring our Switchboards and Motor Control Centres to tough environmental conditions.

This can involve special engineering for access, ventilation, chimneys, fan placement and the study of natural convection paths.

Many applications also involve outdoor use, particularly in remote mine site locations.